Battery sizing for a portable Bluetooth speaker

Two numbers decide whether a battery suits your speaker: its voltage must sit inside your amp’s input range, and its watt-hours decide how long it plays.

Step 1: match the voltage

Lithium-ion cells are 3.7 V nominal and swing from about 3.0 to 4.2 V. A 4S pack (four cells in series) is 14.8 V nominal and runs from about 12 to 16.8 V. A 3S pack is 11.1 V nominal, roughly 9 to 12.6 V. A 6S pack is 22.2 V nominal and about 25.2 V full — too high for many TPA3116 boards listed at 24 V maximum. LiFePO4 packs are flatter: a 12.8 V pack runs about 10 to 14.6 V (2.5 to 3.65 V per cell). Check your amp’s minimum against the pack’s empty voltage, and the amp’s maximum against a full charge, not only the nominal figure. Some 2×50 W boards need 18 V or more for full power, which means a 6S pack or a tool battery — but only if the amp can take the full-charge voltage.

Step 2: calculate watt-hours

Watt-hours = volts × amp-hours. A 14.8 V, 6.4 Ah pack holds about 95 Wh. Allow about 15% loss in the amp and converter, so usable energy is roughly 85% of that.

Step 3: estimate the draw

Amps almost never run at rated power. At moderate listening volume, plan on about 15% of the combined rated power plus about 2 W for the board itself. A 2×50 W stereo amp averages around 17 W. A mono 100 W board should be counted as 100 W, not 200 W, so it also averages around 17 W. A 2×15 W amp averages around 6.5 W. Runtime in hours = usable Wh ÷ average watts.

PackWhHours, 2×50 W ampHours, 2×15 W amp
4S 18650, 3.2 Ah472.46.1
4S 18650, 6.4 Ah954.812.4
6S 18650, 6.4 Ah1427.118.6
LiFePO4 12.8 V, 6 Ah773.910.1
LiFePO4 12.8 V, 20 Ah25612.833.5
12 V lead-acid, 7 Ahabout 60 usable3.07.8

Loud, bass-heavy playback can double these draws and halve the runtimes.

Safety basics

Use a pack with a built-in BMS, charge it with a charger made for its chemistry, and put a fuse close to the battery on the positive lead. Keep packs from being crushed or pierced, and don’t charge a new build unattended the first time. Example parts: 4S pack, LiFePO4 pack, inline fuse.

Open the build planner